POSITION SUMMARY

The Screed Operator operates the controls on the free-floating screed which is attached to the paver vehicle to control the quantity and consistency of asphalt that is deposited; estimating overall quantity for the project as well as the quantity needed to achieve the correct grade in the finished surface.

JOB DESCRIPTION

The Diamond B Screed Operator operates the controls on the free-floating screed which is attached to the paver vehicle to control the quantity and consistency of asphalt that is deposited; estimating overall quantity for the project as well as the quantity needed to achieve the correct grade in the finished surface. The Screed Operator works as part of a crew and reports to the Superintendent.

The Screed Operator will have a good working knowledge of paving processes as well as equipment attachments. The Operator will also have the knowledge of different types and properties of mixes.

Pre-operational Inspection and Daily Service of Equipment is an important task of the position. Planning work procedures is expected to help ensure that work is done according to job specifications.

The Diamond B Screed Operator will demonstrate the ability to adjust to factors affecting safe operation, and communicate with other site personnel, such as paver operator. Complying with equipment safety requirements, following procedures for equipment set up, monitoring drainage, slope and boundaries, finishing all seams and joints are tasks of the Screed Operator Position.

This Work Scope /Job Description are a general description of the basic job function, skills, knowledge and abilities, and the general duties of the position. The Work Scope does not necessarily include all the duties which may be required of a Screed Operator. Work Scopes may be revised as needed.

JOB DUTIES:

• Confirm and clarify assignments. Takes initiative, such as anticipate and prepare for next steps in job.
• Identify service needs, defects (such as leaks, burned out lights, screed plate thickness), and hazardous conditions through visual inspection.
• Assists in positioning equipment and attachments for installation. Install attachments safely.
• Describes types and properties of mixes. Differences between high density mix, Superpave, and other specialty mixes.
• Interpret symbols and markings on stakes. Mark stakes/surface with appropriate symbols or markings, such as location of crown, edge of road.
• Check grades using information on stakes and plans.
• Use safety controls and equipment. Respond to caution, warning, and hazard decals and symbols.
• Adjust to factors affecting safe operation. Maintain stability of equipment.
• Communicate with paver operator and traffic control person/signaler.
• Operate screed controls to achieve job specifications. Monitor and adjust screed and automatics to achieve drainage/slope.
• Adjust where and how thick asphalt is placed. Measure width and thickness of asphalt and determine application rate.
• Finish all seams and joints, communicating with other crew members, such as paver operator.
• Knowledge of location and timing for end of pass and works with paver operator to control material volumes.
• Monitor instrument panel, monitor screed temperature, and use senses to monitor performance, identify equipment and material problems.
• Troubleshoots problems. Identify problems and possible solutions. Communicates to paver operator, superintendent, mechanic etc.
• Position equipment correctly. Adjust operation of equipment to accommodate weather conditions, materials being handled, limitations of equipment and attachments, ground conditions, and stability characteristics of equipment.
• Performs other duties such as raking and shoveling asphalt. Knowledge of tools and uses.